Do you know how to
mold parts maintenance and maintenance? We will go to discuss the below.
1. The mold parts after long time use must be grinding blade, grinding blade surface must be carried out after demagnetization, not with magnetism, otherwise prone to plugging material.
2. The elastic components such as spring the most easily damaged in the process of using, often appear fracture and deformation phenomenon. To take is to change, it is important to note that in the process of change of the specifications of the spring and models, the specifications of the spring and model identified by color, diameter and length of the three, only under the condition of the three are the same can be replaced.
3. The mould punch in use process is easy to appear the phenomenon of break, bend and break, set of is usually to break. The punch and impact damage is generally with the same specifications of the parts for replacement. The parameters of the punch are mainly work parts size, installation size, length, size, etc.
4. The fastening parts, check whether the fastening parts is loose, damage phenomenon, way is to find the same specifications of the spare parts for replacement.
5. Pressure parts such as pressure plate, optimal force glue, such as unloading parts such as stripper, pneumatic lifter, etc. Check the parts when maintenance relationship with accessories, and presence of damage, and to repair the damaged part, pneumatic lifter for leakage phenomenon, and take measures of concrete conditions. Such as damage of tracheal replacement.
The mold parts in the use process, know and understand the mold parts maintenance and maintenance, can time to mold parts maintenance and maintenance, on the one hand can prolong the life of the
mold assembly parts, on the other hand can reduce the damage of the mold assembly parts。