Home

15yrs precision mold and part make

Yize mould scope of business
current position:Home > Industry trend > The types of plastic mold components
The types of plastic mold components
article source:  Executive editor:yizhe279  View:2153  Publish time:2016-02-17
    The types of plastic mold components are mainly composed of the following:
    Forming parts: including the concave die, convex mold, all kinds of molding core. These parts are used to make the inner and outer surface of the product, up and down, the side hole, the side groove and the thread.
    Support parts: mold base plate, fixed plate, supporting plate, block, etc.. Used to fix the mold or support pressure.
    Guide parts: core pins and sleeves. Used to determine the relative position of motion for the mold or ejecting mechanism.
    Core pulling parts: including oblique pins, sliding blocks, etc.. When the mould is opened, the movable core is drawn out to make the product release.
    Ejecting parts: there are push rod, push tube, push the block, push pieces of plate, push piece ring, push rod fixed plate, push plate, etc.. Used for product release.
    Most plastic mould using standard die carrier. This kind of die carrier is composed by standardized and the serialized components, the cavity can be according to the shape of the products manufactured by themselves.
Previous article: The development situation of...   Next article:How to raise the level of th...
Key words of the article
YIZE mould recommending products